What are the advantages of the filter over
a regular flushing program?
Flushing the system only partially cleans the
transmission and much of the contaminant is still in the system. Even
if you could completely clean the transmission and torque converter,
once you start operating, the contaminants begin to build up immediately.
The contaminants become part of the wear cycle and accelerate the wear.
The Magnefine filter continually cleans the fluid, removing any of the
wear particles immediately. The transmission fluid is highly filtered
and in fact, the contaminant level declines throughout the service cycle.
In addition to extending the service cycle by
10,000 miles, all that is required is that the fluid be evacuated or
drained and new fluid installed. Changing of the fluid is recommended
to ensure that the stabilizer package is intact and not because of any
How to install?
Either do it yourself or ask your service center
to install a Magnefine filter. There is a size to suit all makes and
models of vehicles. 5/16 (8mm) 3/8 (10mm) 1/2 (12.7mm) Simple instructions
on insertion into the return cooler line are included in the pack.
When to change?
Recommended change is every 12 months. It is
also advisable to renew your transmission fluid at this time. In fleet
applications a test by the Ford motor company demonstrated fluid and
filter could be 30,000 miles. (Each transmission runs differently and
may require different fluid service intervals.) At change interval you
simply evacuate (or drain) the fluid from the system, change the in-line
filter and refill. OEM's acknowledge it is not necessary to touch the
pan up to 100,000 miles, unless for mechanical concerns. This also avoids
troublesome pan related problems.
Will it effect my transmission performance?
With clean oil all machines will run better than
when dirty. Your transmission is no exception. The Magnefine does not
restrict oil lubrication flow. Itıs been tested in hot and cold conditions
and approved by OEM's in Europe and USA.
Will it clog?
Magnefine double filtration is so efficient it
removes 99% of all wear metal contaminants. Itıs design holds the majority
of contaminants on the uniquely positioned magnet. Even if the filter
element becomes full, it's safety bypass opens for full flow and the
magnet still cleans metal from the system.
Who uses it?
Magnefine is covered by worldwide patents. It
is used by OEMs in Europe, USA, Africa, Middle East, Asia and Australia.
Over one million filters have been installed on transmissions and power
steering units. Fleet operators appreciate Magnefine labor savings at
service and how it extends transmission life. Any vehicle which puts
extra load on a transmission should use Magnefine. This includes towing,
4x4 applications, heavy loads, stop start driving - taxis, fleets or
where extended life of the transmission is desired.
What does it cost?
M.S.R.P. for the filter $39.95. (Internet
Special $16.00 Click here to go to store).